◆Sets start difficultly
◆When the sets do not reflect or rotate slowly when you press the button “start” |
|
Possible reason:
|
Treatment method:
|
|
1 Electric consumption is insufficient.
|
|
|
2 Storage accumulator thread and plug become
|
|
flexible.
|
|
3 The middle relay loses efficiency.
|
|
4 Trouble of the starter.
|
|
5 It is not smooth that the oil supply
|
|
system supports the oil. Do not support the
|
|
oil
|
|
|
|
◆The engine can rotate at certain speed, but it can't catch fire
|
|
Possible reason:
|
Treatment method:
|
|
1 The oil chew has no oil to squirt.
|
1 Check if there is stop or gas leakage
|
|
(not support the oil smoothly)
|
between fuel tank and the oil pumps
|
|
2 The fuel system is permeated by the air
|
2 Open the exhaust gas screw and check the
|
|
3 The fuel pumps' time is inaccurate or the
|
situation of producing oil.
|
|
fuel pumps are in trouble
|
3 Reset the oil pump time.
|
|
|
4 Overhaul or change the oil pump, then try
|
|
|
again.
|
|
◆After starting shut down by oneself
|
|
Possible reason:
|
Treatment method:
|
|
1 The oil passage is not smooth, the filter
|
1 Check the blocked situation of oil
|
|
stops up, the trouble of the oil pump
|
passage; change the filter core of the
|
|
2 The empty filter stops up seriously.
|
diesel oil in case of necessity.
|
|
3 The oil chew is in trouble.
|
2 Check the state of the empty filter.
|
|
4 Temperature is too low.
|
3 Change the oil chew.
|
|
|
4 Heat water to start.
|
|
◆Abnormally engine work
|
|
◆Black smoke.
|
|
Possible reason:
|
Treatment method:
|
|
1 The empty filter stops up seriously.
|
1 Check whether the empty filter loses
|
|
2 Fuel trademark is incorrect.
|
efficiency
|
|
3 Pressure of gas exhaust is too heavy.
|
2 Check the quality of the fuel.
|
|
4 The oil pump is in trouble.
|
3 Check if the oil chew is in atomized state.
|
|
5 The oil chews stops up
|
4 Check the amount of oil supported of the
|
|
6 The compresses strength of the engine jar
|
pump and revitalize.
|
|
is insufficient.
|
5 Check it is normal that the air cylinder
|
|
◆Emit the blue smoke or white smoke
|
|
Possible reason:
|
Treatment method:
|
|
1 The trade mark of the lubricating oil is
|
1 check whether the engine oil is too rare
|
|
selected improperly, the oil level is too
|
and the oil is the range ruled or not.
|
|
high.
|
|
|
2 It is short to the time to start, the
|
2 After sets run for much long time without
|
|
temperature of the engine is low.
|
treatment, every is ok.
|
|
3 The piston is worn, the increase jade
|
3 Check if the interval of the piston ring,
|
|
articles lose efficiency.
|
air cylinder and the work of pressurization
|
|
|
device is normal
|
|
◆It is unstable to run
|
|
|
Possible reason:
|
Treatment method:
|
|
1 The oil passage is not smooth or there is
|
1 Check whether the oil passage or the tie-in
|
|
air.
|
it is loose and the filter is stopped up.
|
|
2 The oil pump or the oil chew is in trouble.
|
2 Check if oil pump normally gush out oil,
|
|
|
oil pump rack move flexiblly, the oil chews
|
|
are atomized.
|
|
3 The part of the air filter is blocked.
|
3 Check the clean state of the core of the
|
|
|
empty filter.
|
|
◆There is strange noise in engines
|
|
Possible reason:
|
Treatment method:
|
|
1 Check the fuel and choose improperly or the
|
1 Check the trade mark of the fuel or add
|
|
fuel is bad.
|
the reliable diesel oil, then start again.
|
|
2 Check if extrusion of the oil is wrong.
|
2 Check if extrusion of the oil is right.
|
|
3 The oil chew broke down
|
3 Check whether the oil chew is normal.
|
|
◆Engines are insufficient in power:
|
|
Possible reason:
|
Treatment method:
|
|
1 Oil passage to support oil is not smooth.
|
1 Check if the oil passage that supports the
|
|
|
oil is smooth and leak gas.
|
|
2 High-pressure oil pumps work abnormally
|
2 Check and adjust the high-pressure oil pump
|
|
3 The oil chews work abnormally.
|
3 Check and change the oil chews.
|
|
4 The air system is blocked.
|
4 Check, clean or change the filter core of
|
|
the air.
|
|
◆Engine oil pressures is too low or too high
|
|
Possible reason:
|
Treatment method:
|
|
1 Engine oil SAE value is incorrect
|
1 Check whether the trademark of engine oil
|
|
|
is correct.
|
|
2 Manometer shows inaccurately.
|
2 Change the manometer to try again.
|
|
3 The engine oil filter is blocked.
|
3 Check or change the engine oil filter.
|
|
◆Temperature is too high
|
|
|
Possible reason:
|
Treatment method:
|
|
1 It is not normal to the arrange wind
|
1 Check whether the work of the water pump is
|
|
cooling system.
|
normal, the gasoline economizer could be
|
|
|
opened.
|
|
2 Inaccurately gush out the oil.
|
2 Check whether the water tank outside is
|
|
3 Overload for a long time.
|
3 Correct it while gushing out the oil.
|
|
stopped and the elasticity of the fan belt.
|
4 Check whether load is rational
|